MG5223 S-Band Magnetron

 

ABRIDGED DATA
Fixed frequency pulse magnetron.
Operating frequency	3050 ± 10				MHz
Typical peak output power	30				kW
Magnet	integral
Coupler	mates with NATO S.N. 5985-99-083-0058

Electrical
Cathode	indirectly heated
Heater voltage (see note 1)	6.3	V
Heater current at 6.3V	1.25	A
Cathode pre-heating time (minimum)	180	s
Heater starting current, peak value, not to be exceeded	6.0	A max

Mechanical
Overall dimensions	see outline
Netweight	2.1 kg approx
Mounting position	any
Cooling (see note 2)	natural or forced-air
A minimum clearance of 25 mm must be maintained between the magnetron and any magnetic materials.

 

NOTES

1. With no anode input power.
On the application of anode power, the heater voltage must be reduced as follows:
Mean input power Heater voltage
(W)       (Vrms)
less than 25 6.3
25       to   62 5.3
62       to   100 4.5
The magnetron heater must be protected against arcing by the use of a minimum capacitance of 4000 pF shunted across the heater directly at the input terminals; in some cases a capacitance as high as 2 mF may be necessary depending on the equipment design. For further details see the Magnetron Preamble.

 

2. The anode temperature must be kept below the limit specified by means of a suitable flow of air over the anode body.

 

OUTLINE DIMENSIONS

Outline Notes

Positional tolerance of holes 0.4 mm diameter with respect to waveguide.