ALLIED ePARTS-얼라이드이파트(AEP)

KUM903/KUM904/KUM950
The 9m HF antennas are similar in design as the 8m KUM803/KUM850 antennas, but with
an extended 1m (3.3’) length.
KUM903: 3-section for mast mounting
KUM904: 4-section for mast mounting
KUM850: 2-section for mast mounting

The KUM903 and now the new KUM904 are especially manufactured to make transportation
easier/cheaper.

KUM903-1 or KUM950-1
With connection box for use when using coaxial cable.

KUM903-2 or KUM950-2
With connection transformer box for receiving purpose only.
The transformer is recommended if the antenna is used at low frequencies
(0.15-30MHz) or when long cable feeding is necessary.

DECKMOUNT
All the different KUM903 types are now available in a deckmount version.
KUM904 can also be delivered with connection box or connection transformer
box on request.

총길이 9M로 HF SSB 용으로 사용되는 안테나 입니다.

KUM803/KUM850/KUM1200
The 8m KUM850 and KUM803 are one of the most popular marine HF antennas used for
commercial and fishing applications due to the sturdy construction and excellent performance.
The KUM1200 is a rugged self-supporting antenna whip with 2000W max. power.
KUM850: 2-section for mast mounting
KUM803: 3-section for mast mounting
KUM1200: 3-section for deck mounting

KUM803-1 or KUM850-1
With connection box for use when using coaxial cable.

KUM803-2 or KUM850-2
With connection transformer box for receiving purpose only. The transformer is recommended
if the antenna is used at low frequencies (0.15-30MHz) or when long cable feeding is necessary.

DECKMOUNT
All the different KUM803 types are now also available in a deckmount version.

선박용 HF/SSB 안테나 입니다.

KUM700/KUM701/KUM703/KUM731
Four different 7m (22’) HF antennas. These HF/SBB antennas provide an efficient balance
between length and performance:
KUM700: 2 section for mast mounting
KUM703: 3 section for mast mounting
KUM701: 2 section for mounting directly on 1”-14 threaded mounts.
KUM731: 3 section for mounting directly on 1”-14 threaded mounts.

KUM700-1 or KUM703-1
With connection box for use when using coaxial cable.

KUM700-2 or KUM703-2
With connection transformer box for receiving purpose only.
The transformer is recommended if the antenna is used at low frequencies (0.15-30MHz) or
when long cable feeding is necessary.

KUM761
Similar to KUM701, but with extra strong/thicker dimension fibreglass.
KUM761 is also available as deckmount (similar to KUM803DM and KUM903DM).

Mounting hardware available as option:
For mast mounting: N070F, N075F, N080F, N085F and N090F (see page 26 for details)
Note: Two clamps required for each antenna.For KUM701and KUM731 a N200F upper
support is required.

The connection boxes can be purchased separately as follows:
K483F: Connection box
K493F: Connection Transformer box

선박용 HF/SSB 안테나

KUM600/KUM601/KUM603
A 6m HF antenna as an alternative to the KUM480/481 and KUM700/701/703/731.

The KUM600 and KUM601 are 2-section antennas, where the KUM603 is a 3-section
antenna, which makes transportation easier. KUM600 and KUM603 are for mast mounting
and KUM601 for mounting directly on 1”-14 threaded mounts.

KUM600-1 or KUM603-1
With connection box for use when using coaxial cable.

KUM600-2 or KUM603-2
With connection transformer box for receiving purpose only.
The transformer is recommended if the antenna is used at low frequencies
(0.15-30MHz) or when long cable feeding is necessary.

KUM601 can also be delivered with connection box or connection transformer
box on request.

 

E2V Part No.	Frequency (MHz)	MDS (dBm typical)	Noise figure (dB max)	Power supplies
B3IM16161	9.3 - 9.5	-100	4.7	+15, +5, -15
	4 bandwidths, perfomance monitoring, AFC
B3IM16171	9.1 - 9.3	-100	4.7	+15, +5, -5.2
	Frequency variant of B3IM1616

E2V Part No.	Frequency (MHz)	ENR (dB max)	Incident power pulsed, 1µs (kW max)	Power supplies
B3NG1639	8.8 - 9	15	60	+21 V, 0 - 25 mA
	Waveguide (WG16) cal. frequency 8900 GHz
B3NG1641	9.3 - 9.5	15	60	+21 V, 0 - 25 mA
	Waveguide (WG16), cal. frequency 9.375 GHz
B3NG1642	9.3 - 9.5	15	60	+21 V, 0 - 25 mA
	Waveguide (WG16), cal. frequency 9.410 GHz
B3NG1004	3000 - 3100	15	60	+24 V, 0 - 30 mA
	Waveguide (153 IEC - R23)
B3NG1643	9420 - 9560	15	60	+21 V, 0 - 30 mA
	Waveguide (WG16)

 

E2V Part No.	Frequency (MHz)	Gain (dB min)	Noise figure (dB max)	Power supplies
B7RX1001	3.02 - 3.08	6	3	+12 V, Vr 4 - 24 V
	IF output BNC female, filtered power supplies
B7RX1002	3.02 - 3.08	6	3	+12 V, Vt 4-24 V
	Feedthrough pin connectors
B7RX1008	3.02 - 3.08	6	3	+12 V, Vt 4-24 V
	IF output BNC female, RF input filter
B3RX1612	9.3 - 9.5	2.5	3.5	+5 V, Vt 4-24 V
	PCB edge connector
B3RX1613	9.36 - 9.46	2.4	4.5	+5 V, Vt 5-35V
	Integrated limiter
B3RX1616	9.36 - 9.46	-7	7.5	+5 V, Vt 2-11 V
	Integrated limiter
B3RX1618	9.36 - 9.46	2	5.5	+5 V, Vt 5-30V
	Integrated high power limiter
B3RX1619	9.36 - 9.46	-7	7.5	+5 V, Vt 5-30V
	Integrated high power limiter
B3RX1620	9.3 - 9.5	2.5	3.5	+5 V, Vt 4-24V
	PCB edge connector
B3RX1622	9.3 - 9.5	2.5	3.5	+5 V, Vt 4-24V
	PCB edge connector, hermetic seal for airborne use
B3RX1627	9.1 - 9.3	2.5	3.5	+5 V, Vt 4-24V
	PCB edge connector
B3RX1628	9.2 - 9.3	2.5	3.5	+5 V, Vt 4-24V
	PCB edge connector
B3RX1629	8.8 - 9	2.5	3.5	+5 V, Vt 4-24V
	PCB edge connector
B3RX1631	9.1 - 9.3	3	3	+5 V, Vt 4-24V
	PCB edge connector, 100 MHz IF
B3RX1632	9.3 - 9.5	3	3	+5 V, Vt 4-24V
	PCB edge connector, 100 MHz IF
B3RX1635	9.36 - 9.46	-1.5	6.5	+5 V, Vt 5-30V
	Integrated high power limiter
B3RX1637	9.325 - 9.475	-7	7.5	+5 V, Vt 4-24V
	Single balanced mixer and electronically tuned LO
B3RX1638	9.3 - 9.43	-7	7.5	+5 V, Vt 4-24V
	PCB edge connector
B3RX1640	9.34 - 9.48	4	2	+5 V, Vt 4-24V
	PCB edge connector
B3RX1623	9000 - 9200	2.5	2.5	+5 V, Vt 4 - 24V
	PCB edge connector
B3RX1639	9300 - 9430	77	7.5	+5 V, Vt 4 - 24V
	PCB edge connector
B3RX1624	9300 - 9450	2.5	2.5	+5 V, Vt 4 - 24V
	PCB edge connector
B3RX1648	9320 - 9500	2.5	2.5	+5V, Vt 4, 24V
	External local oscillator
B3RX1654	9420 - 9560	2.5	1.5	+5V, Vt 4 - 25V
	PCB edge connector

 e2v technologies manufacture Ferrite Devices operation from 350 MHz to 120 GHz, for a wide variety of applications from low cost marine radar to state-of-the-art military devices. Standard units are available in regular waveguide sizes and some special sizes.

e2v technologies offer circulators and isolators as stand-alone units and also as part of an integrated microwave package. They all come with the assurance that e2v technologies have facilities to power test units, giving confidence in all devices.

The design and manufacturing facility at Lincoln has an extensive capability and technical knowledge built up for ferrite components. Below you can find a guide to the range of standard components available.

 

E2V Part No.	Frequency (MHz)	Peak Power (kW)	Isolation (dB)	Insertion loss max (dB)
B3JC1007	3030 - 3070	30	20	0.3
B3JC1660	8800 - 9000	30	20	0.4
B3JC1008	3030 - 3070	30	20	0.3
B3JC1651	9000 - 9200	30	20	0.4
B3JC1647	9300 - 9500	4	20	0.4
B3JC1648	9300 - 9500	10	20	0.4
B3JC1649	9300 - 9500	30	20	0.4
B3JC1649R	9300 - 9500	56	20	0.5