ALLIED ePARTS-얼라이드이파트(AEP)

DGPS-6 is a high quality stainless steel omnidirectional whip receiver antenna for the Long Range Navigation system.
The DGPS-6 antenna is manufactured in premium quality materials in order to prevent galvanic corrosion.
The DGPS-6 is equipped with 3/8” – 24 thread for usage with any LORAN receiver or DGPS receiver.

DGPS-6 is subject for improvement at all times.
The antenna has the same rugged design as all other AC Marine antennas thus it withstands harsh environmental conditions.

GENERAL DATA

Electrical specifications
Frequency range (MHz)	0.09 - 0.11
Nominal impedance (ohm)	50
Polarization	Vertical
Connector / cable	3/8” – 24 thread
DC-shorted	No
Mechanical specifications
Length (m/ft)	0.6 / 2.0
Weight (kg/lbs.)	0.1 / 0.35
Wind rating (m/s / mph)	45 / 101
Colour	Stainless steel
Mounting:  No mount included.

DGPS-4 is a high quality stainless steel omnidirectional whip receiver antenna for the Long Range Navigation system.
The DGPS-4 antenna is manufactured in premium quality materials in order to prevent galvanic corrosion.
The DGPS-4 is equipped with 3/8” – 24 thread for usage with any LORAN receiver or DGPS receiver.

DGPS-4 is subject for improvement at all times.
The antenna has the same rugged design as all other AC Marine antennas thus it withstands harsh environmental conditions.

GENERAL DATA

Electrical specifications
Frequency range (MHz)	0.09 - 0.11
Nominal impedance (ohm)	50
Polarization	Vertical
Connector / cable	3/8” – 24 thread
DC-shorted	No
Mechanical specifications
Length (m/ft)	1.2 / 4.0
Weight (kg/lbs.)	0.2 / 0.7
Wind rating (m/s / mph)	45 / 101
Colour	Stainless steel
Mounting:  No mount included.

DGPS-2 is a high quality fibreglass omnidirectional whip receiver antenna for the Long Range Navigation system.
The DGPS-2 antenna is manufactured in premium quality materials in order to prevent galvanic corrosion.
The DGPS-2is equipped with 3/8” – 24 thread for usage with any LORAN receiver or DGPS receiver.

DGPS-2 is subject for improvement at all times.
The antenna has the same rugged design as all other AC Marine antennas thus it withstands harsh environmental conditions.

GENERAL DATA

Electrical specifications
Frequency range (MHz)	0.09 - 0.11
Nominal impedance (ohm)	50
Polarization	Vertical
Connector / cable	3/8” – 24 thread
DC-shorted	No
Mechanical specifications
Length (m/ft)	1.2 / 4.0
Weight (kg/lbs.)	0.2 / 0.7
Wind rating (m/s / mph)	45 / 101
Finish	Polyethylene lacquer
Colour	White
Mounting:  No mount included.

LORAN is a high quality fibreglass omnidirectional whip receiver antenna for the Long Range Navigation system.
The LORAN antenna is manufactured in premium quality materials in order to prevent galvanic corrosion.
The LORAN is equipped with 3/8” – 24 thread for usage with any LORAN receiver or DGPS receiver.

LORAN is subject for improvement at all times.
The antenna has the same rugged design as all other AC Marine antennas thus it withstands harsh environmental
conditions.

GENERAL DATA

Electrical specifications
Frequency range (MHz)	0.09 - 0.11
Nominal impedance (ohm)	50
Polarization	Vertical
Connector / cable	3/8” – 24 thread
DC-shorted	No
Mechanical specifications
Length (m/ft)	2.0 / 6.6
Weight (kg/lbs.)	0.36 / 1.3
Wind rating (m/s / mph)	45 / 101
Finish	Polyethylene lacquer
Colour	White
Mounting:  No mount included.

NAVtex3 is a high quality fibreglass omnidirectional Navtex antenna.
The NAVTEX3 is manufactured in premium quality materials in order to prevent galvanic corrosion.
The NAVTEX3 has an amplifier integrated and a ground cable attached.

NAVTEX3 is subject for improvement at all times.
The antenna has the same rugged design as all other AC Marine antennas thus it withstands harsh
environmental conditions.
The NAVTEX3 is an active receiving antenna specially designed for the NAVTEX receivers using 490kHz, 518kHz and 4209,5kHz.
The NAVTEX3 is only 32cm and easy to install using the standard AC Marine mounting hardware.

GENERAL DATA

Electrical specifications
Frequency range (MHz)	490 / 518 / 4209.5
Nominal impedance (ohm)	50
Output max (dBm)	10
Supply voltage (V)	9 - 12
Supply current (mA)	10
IP3 - High Band (dBm)	+27
IP3-Low Bands (dBm)	+20
Polarization	Vertical
Connector	UHF-female
DC-shorted	No (AC ground through ground cable)
Mechanical specifications
Length (m/ft)	0.32 / 1.05
Weight (kg/lbs.)	0.15 / 0.33
Wind rating (m/s / mph)	45 / 101
Material	Polyethylene
Colour	White
Temperature range (°C / °F)	-40 to + 60 / -40 to +140

Mounting:
N240F mount included.
Can be used with all 1¼-11 TPI standard AC Marine mounting equipment.

BB1 Antenna is a high quality fibreglass omnidirectional HF antenna.
The BB1 is manufactured in premium quality materials in order to prevent galvanic corrosion.
The BB1 has an amplifier integrated and a ground cable attached.

BB1 is sold worldwide during more than one decade. The antenna is subject for improvement at all times.
The antenna has the same rugged design as all other AC Marine antennas thus it withstands harsh
environmental conditions.
The BB1 is an active Broadband antenna covering 100 kHz to 30 MHz.
The BB1 is only 32 cm and easy to install using the standard AC Marine mounting hardware.

GENERAL DATA

Electrical specifications
Frequency range (MHz)	0.1 - 30
Nominal impedance (ohm)	50
Output max (dBm)	+10
Supply voltage (V)	9 - 12
Supply current (mA)	30
IP3 (dBm)	+38 @ 10MHz
Polarization	Vertical
Connector	UHF-female
DC-shorted	No (AC ground through ground cable)
Mechanical specifications
Length (m/ft)	0.32 / 1.05
Weight (kg/lbs.)	0.2 / 0.45
Wind rating (m/s / mph)	45 / 101
Material	Polyethylene
Colour	White
Temperature range (°C / °F)	-40 to + 60 / -40 to +140

Mounting:
N240F mount included.
Can be used with all 1¼-11 TPI standard AC Marine mounting equipment.