MG5388 X-Band Magnetron

ABRIDGED DATA
Compact, rugged, lightweight, fixed frequency pulse magnetron
Operating frequency	9410 ± 30				MHz
Typical peak output power	4.0				kW
Magnet	integral
Coupler	IEC UBR100
Electrical			Mechanical
Cathode	indirectly heated		Overall dimensions	see outline
Heater voltage (see note 1)	6.3	V	Netweight	500 g approx
Heater current at 6.3V	0.5	A	Mounting position	any
Cathode pre-heating time (minimum)(see note 2)	30	s	Cooling	natural
Input capacitance	8.0	pF max	A minimum clearance of 25mm must be maintained between the magnetron and any magnetic materials.

 

NOTES

1. No reduction of heater voltage is required at any value of mean input power. For optimum performance 

  a value within the specified ratings must be maintained.
  The magnetron heater must be protected against arcing by the use of a minimum capacitance of 4000 pF 

  shunted across the heater directly at the input terminals; in some cases a capacitance as high as 2 mF

  may be necessary depending on the equipment design. For further details see the Magnetron Preamble.

 

2. For ambient temperatures above 0℃. For ambient temperatures between 0 and -55℃, cathode pre-

  heating time is 45 seconds minimum.

 

OUTLINE DIMENSIONS

OUTLINE NOTES

1. Positional tolerance 0.4 mm diameter

2. The mating surface of the magnetron baseplate will be flat to within 0.2 mm.